Influence of trace elements supplementation on the production of recombinant frutalin by Pichia pastoris KM71H in fed-batch process

Frutalin, a galactose-specific lectin used to detect specific tumour markers, is a protein with low expression level in breadfruit. In the present study, fed-batch fermentation in a stirred tank bioreactor was used as a strategy to enhance protein production by a recombinant Pichia pastoris KM71H. By using this process, the production of recombinant frutalin was 4-fold higher than the value obtained in shaker flasks batch assays. Supplementation of the fermentation medium with trace elements (Pichia trace minerals, PTM) was also evaluated in order to stimulate production of the recombinant protein. The addition of PTM to the minimum medium afforded a recombinant protein production of 13.4 mg L^?1, which was 2.5-fold higher than that achieved from the culture medium without PTM supplementation. These results are significant as the development of strategies to improve the production of recombinant frutalin may broaden its application in cancer diagnosis.     

Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).     

Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines

In the paper an important issue of vibrations of the transmission line in real conditions was analyzed. Such research was carried out by the authors of this paper taking into account the cross-section of the cable being in use on the transmission line. Analysis was performed for the modern ACSR high voltage transmission line with span of 213.0 m. The purpose of the investigation was to analyze the vibrations of the power transmission line in the natural environment and compare with the results obtained in the numerical simulations. Analysis was performed for natural and wind excited vibrations. The numerical model was made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response was checked and compared with the results of the accelerations obtained in the situ measurements. A frequency response functions (FRF) were calculated. The credibility of the model was assessed through a validation process carried out by comparing graphical plots of FRF functions and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. Particular attention was paid to the hysteretic damping analysis. Sensitivity of the wave number was performed for changing of the tension force and section area of the cable. The next aspect constituting the purpose of this paper was to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show very good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, cable cross-section,tensile strength or material damping can be studied.     

Chemical Composition of Natural Hydrolates and Their Antimicrobial Activity on Arcobacter-Like Cells in Comparison with Other Microorganisms

Hydrolates obtained via the hydrodistillation and steam distillation of Lavandula angustifolia Mill., Syzygium aromaticum L., Foeniculum vulgare Mill., and Laurus nobilis L. were analyzed by gas chromatography with flame ionization detector (GC-FID) and gas chromatography coupled to mass spectrometry (GC-MS). Additionally, the hydrolates were evaluated for antimicrobial activity (disk-diffusion and microdilution method), influence on biofilm formation (Christensen method) and cytotoxicity of concentrated hydrolates against human cell lines (A549) by xCELLigence system. Using chemical analysis, 48, 9, 13 and 33 different components were detected in lavender, clove, fennel and laurel hydrolates, respectively. Lavender hydrolate contained the largest proportion of 1,8-cineol, linalool furanoxide, and linalool. The main components of laurel hydrolate were 1,8-cineol, 4-terpineol and α-terpineol. Fenchone and estragole were the most abundant in fennel hydrolate, and eugenol and eugenyl acetate in clove hydrolate. Concentrated hydrolates showed significant antimicrobial activity. Clove hydrolate was among the most antimicrobially active agents, most preferably against C. albicans, with an inhibition zone up to 23.5 mm. Moreover, concentrated hydrolates did not show any cytotoxic effect again8 st human A549 cells. In the presence of the non-concentrated hydrolates, significantly reduced biofilm formation was observed; however, with concentrated clove hydrolate, there was an increase in biofilm formation, e.g., of A. thereius, A. lanthieri, and A. butzleri. Research shows new findings about hydrolates that may be important in natural medicine or for preservation purposes.     

Structural and Dynamic Characterization of the Molecular Hub Early Region 1A (E1A) from Human Adenovirus

The small‐DNA human adenovirus encodes one of the most versatile molecular hubs, the E1A protein. This protein is essential for productive viral infection in human cells and a vast amount of biologically relevant data are available on its interactions with host proteins. Up to now, however, no high‐resolution structural and dynamic information on E1A is available despite its important biological role. Among the different spliced variants of E1A, two are expressed at high level in the early stage of infection. These are 243 and 289 residues isoforms. Herein, we present their NMR characterization, showing that they are both highly disordered, but also demonstrate a certain heterogeneous behavior in terms of structural and dynamic properties. Furthermore, we present the characterization of the isolated domain of the longer variant, known as CR3. This study opens the way to understanding at the molecular level how E1A functions.     

Immobilized purine nucleoside phosphorylase from Schistosoma mansoni for specific inhibition studies

The parasite Schistosoma mansoni (Sm) depends exclusively on the salvage pathway for its purine requirements. The enzyme purine nucleoside phosphorylase (PNP) is, therefore, a promising target for development of antischistosomal agents and an assay for screening of inhibitors. To enable this, immobilized SmPNP reactors were produced. By quantification of hypoxanthine by liquid chromatography, kinetic constants (K _M) for the substrate inosine were determined for the free and immobilized enzyme as 110 ± 6.90 μmol?L ^?1 and 164 ± 13.4 μmol?L ^?1 , respectively, indicating that immobilization did not affect enzyme activity. Furthermore, the enzyme retained 25 % of its activity after four months. Non-Michaelis kinetics for the phosphate substrate, and capacity for P_i-independent hydrolysis were also demonstrated, despite the low rate of enzymatic catalysis. Use of an SmPNP immobilized enzyme reactor (IMER) for inhibitor-screening assays was demonstrated with a small library of 9-deazaguanine analogues. The method had high selectivity and specificity compared with screening by use of the free enzyme by the Kalckar method, and furnished results without the need for verification of the absence of false positives.

Simple One-Pot Synthesis of New Derivatives of the Macrocyclic Aminal 1,3,7,9,13,15,19,21-Octaazapentacyclo-[19.3.1.13,7.19,13.115,19]octacosane (OAPO)

A series of 2,2′-(dihydropyrimidine-1,3(2H,4H)-diyldimethanediyl)bis(substituted-phenols) was synthesized using a Mannich-type reaction between the macrocyclic aminal 1,3,7,9,13,15,19,21-octaazapentacyclo[19.3.1.1^3,7.1^9,13.1^15,19]octacosane (OAPO) (1) and substituted phenols in basic media. These previously unreported compounds were separated from the reaction mixture by column chromatography in highly pure form with 25–75% yields. The most stable conformer was predicted using AM1-type semiempirical quantum chemical calculations.     

Design and synthesis of two epoxide derivatives from 3-ethynylaniline

For several years ago, several epoxide derivatives have been prepared using different methods; however, some protocols use reagents which could be expensive and require specials conditions. The aim of this investigation was to prepare two new epoxide-derivatives from 3-ethynylaniline using some reactions such as oximation, acetylation, 2 + 2 addition, functionalized chloroamides, and epoxidation via Darzens reaction. The chemical characteristics of epoxide derivatives were determinate through a spectroscopic and spectrometric analysis. In conclusion, it is noteworthy that the reactions used in this study do not involve expensive reagents or special conditions for the synthesis of epoxide derivatives.     

Conformational and electronic study of dopamine interacting with the D2 dopamine receptor

We report an exhaustive conformational and electronic study on dopamine (DA) interacting with the D₂ dopamine receptor (D₂DR). For the first time, the complete surface of the conformational potential energy of the complex DA/D₂DR is reported. Such a surface was obtained through the use of QM/MM calculations. A detailed study of the molecular interactions that stabilize and destabilize the different molecular complexes was carried out using two techniques: Quantum Theory of Atoms in Molecules computations and nuclear magnetic shielding constants calculations. A comparative study of the behavior of DA in the gas phase, aqueous solution, and in the active site of D₂DR has allowed us to evaluate the degree of deformation suffered by the ligand and, therefore, analyze how rustic are the lock-key model and the induced fit theory in this case. Our results allow us to propose one of the conformations obtained as the “biologically relevant” conformation of DA when it is interacting with the D₂DR.